Standard Test Optical Patch Cord Of Optical Fiber Jumper Simplex / Duplex Master Cord
A standard test line of optical fiber jumper is same as ordinary jumper in appearance. Mainly used in optical communication testing instruments, the requirements for the insertion of optical fiber connectors are very high. Because of its high precision and minimal error and high technical requirements, it is difficult for general enterprises to meet the requirements.
Product application
1. Optical Fiber Access Network
2. Fiber to Home (FTTH)
3. Standard connector test line
4. Data transmission of active optical module
5. Active light module comparison test
Product characteristics
1. High stability and reliability performance
2. Low insertion loss, high return loss
3. High standard end geometric parameters
4. Various specifications of connectors: FC, SC, ST, MU, LC
5. High-standard raw materials for products
Technical Specification
| Specification | UPC | APC |
| Optical Performance | Insertion Loss SM&MM(dB) | ≤0.10 | ≤0.10 |
| Return Loss | SM | ≥55 | ≥65 |
| MM | ≥40 | ---- |
| Geometric Parameter | Radius of Curvature(mm) | SC | 10-20 | 7-12 |
| LC | 7-15 | 5-10 |
| Apex Offset | ≤20 | ≤30 |
| Fiber Height(Spherical) | ±30 |
| Angular Error | ----- | 8°±0.2° |
| Eccentricity(Fiber Core to Ferrule) | ≤0.5um
|
Ordering Information
Master Cord:
FC /UPC - FC / UPC / SM / |Φ3 / L M
1 2 3 4 5 6 7
| 1 Connector Type | FC, SC,ST, MU, LC |
| 2 Endface | UPC,APC |
| 3 Connector Type | FC, SC,ST ,MU , LC |
| 4 Endface | UPC , APC |
| 5 Fiber Mode | SM=Single mode ,MM=Multimode |
| 6 Cable Diameter | Φ3 , Φ2 , Φ0.9 |
| 8 Cable Length | L = 1 , 2 , 3 ...meter,or as required |
